Go ahead, use your imagination and create wonders using this command while we are at it, practice makes perfect. Hope you have learned the basics of using the EXTRUDE command in Solidworks.
TUTORIAL SOLIDWORKS 2012 BAHASA INDONESIA PDF FREE
This technique is used in advanced modeling to control parameters in a more free way. I have unchecked the option for Merge result, therefore the new extrusion will not be merged to the rectangular base and will become its own body. Change to Surface/Face/Plane and select the face number 2 (Green Face) then change the direction 1 to Up to Surface then select Face 3 (Purple Face). This time, I am not going to use dimensions. Step 14 Then select extrude Boss/Base from the Feature tab.
Step 13 Make another sketch on the Front plane and give the dimensions as on the image below. You can use this option to change the thickness of the extrusion edge. Step 12 Beside the Direction 1 and Direction 2, there’s also a Thin Feature option with which you can create a Thin Extrude. Step 11 Then draw a rectangle with the size 30 mm x 25 mm. Step 10 Click on the right surface and select sketch. You can also select the needful contours to create 3d parts. The draft is used to create the tapered face using angles. There is also an option with the Draft outward to change the direction of the draft. Step 9 Go (once more) to the feature tab and select extrude Boss/Base, Change the draft size to 10 degrees. Step 8 Draw two rectangles on the top surface and give dimensions same as on the picture below. You can set this by setting it to Plane, Surface, Face, Vertex and Offset. With the From option, you can set the place you want to start extrusion.
Change the sketch plane to offset, then change direction and give 10 mm offset. Step 7 Go to the feature tab and select Extrude Boss/Base. Step 5 Click on highlighted area and then select sketch Step 6 Click on the Line command and then create a triangle as the image below shows. The end condition can be thought of as the parameter or rule that causes the extrusion to stop. Bahasa indonesia.įrom the drag drop down menu, select the Bose/Base, Then a side drop down menu will appear, select Extrude and give 15 mm of thickness, set the end point to Blind. Introduction to Solid Modeling Using SolidWorks 2012 SolidWorks Simulation Tutorial In this. Step 4 Go to the feature tab (you can also go to Solidworks Insert Menu). Step 2 Select the desired plane, click on the Top plane and select sketch Step 3 Make a rectangle with the origin of the sketch as the origin of the rectangle, click on smart dimension and give 150 mm for length and 80 mm for width. Let’s use the example below to play with the Extrude command in Solidworks Solidworks Extrude command Solidworks EXTRUDE Step 1 First, Create a New Part.
This feature contains various sub-options like blind, up to a surface, up to vertex, offset from a surface, up to body and mid-plane.
0 kommentar(er)
